All Things Mk5 > Members Rides
Bigmig95's Gti - Now stage 3 BYD installation
AndrewWillis:
--- Quote from: Timepillow on September 21, 2014, 11:59:08 pm ---Great thread mate! :happy2:
Iv been looking to put a OEM DAB ariel in my car but have been having trouble finding the parts :sad1:
Glad to see what you have used to get yours working...give me a couple of ideas :happy2:
--- End quote ---
Kufatec Do a complete kit for it. Just ordered myself one.
http://www.kufatec.co.uk/shop/en/DAB-/-DAB-Tuner/Retrofit-kit-DAB-/-DAB-antenna-module
Mario88:
Top motor mate. Looks good.
toms85:
--- Quote from: bigmig95 on September 21, 2014, 08:11:12 pm ---Pretty straightforward to be honest, trickiest bit was feeding the cable through the tailgate grommet. There's a how to here but no pictures
http://www.golfgtiforum.co.uk/index.php?topic=263921.0
You'll need the amplifier I have and it goes on the left as you look at the rear of the car. Fitting is easy. You'll also need a twin Fakra connector and a long lead to get to the front of the car.
I got my double connector here
http://www.ebay.co.uk/itm/121040328853?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
And the long lead to the stereo here
http://www.ebay.co.uk/itm/390874796401?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
You'll need to remove the straight connector off the long lead (clips off easy) and put the double connector on the lead instead. Remove the right angled connector on the other end and feed through the boot , grommet, headlining and into the stereo. Put the right angled connector back on and plug into you DAB socket on your stereo.
Jobs a good 'un. :happy2:
If you need anymore info let me know.
--- End quote ---
Hi mate, I've just installed the same amp in mine. Do you have two cables going into the amp or just the one for the DAB socket on the RCD?
mrvertigo73:
This all looks great bigmig and defo the way I wanna go with my K03 '05 AXX GTI! Quick question - did you have any trouble swapping midline for highline? I bought highline clock off EBay, but everyone with VCDS is telling me it's a nightmare to swap? Any clues? I'm looking to swap in a MFSW too (mines DSG)
bigmig95:
--- Quote from: toms85 on October 10, 2014, 11:40:55 pm ---
--- Quote from: bigmig95 on September 21, 2014, 08:11:12 pm ---Pretty straightforward to be honest, trickiest bit was feeding the cable through the tailgate grommet. There's a how to here but no pictures
http://www.golfgtiforum.co.uk/index.php?topic=263921.0
You'll need the amplifier I have and it goes on the left as you look at the rear of the car. Fitting is easy. You'll also need a twin Fakra connector and a long lead to get to the front of the car.
I got my double connector here
http://www.ebay.co.uk/itm/121040328853?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
And the long lead to the stereo here
http://www.ebay.co.uk/itm/390874796401?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
You'll need to remove the straight connector off the long lead (clips off easy) and put the double connector on the lead instead. Remove the right angled connector on the other end and feed through the boot , grommet, headlining and into the stereo. Put the right angled connector back on and plug into you DAB socket on your stereo.
Jobs a good 'un. :happy2:
If you need anymore info let me know.
--- End quote ---
Hi mate, I've just installed the same amp in mine. Do you have two cables going into the amp or just the one for the DAB socket on the RCD?
--- End quote ---
I wired the remaining pin (pin 2) on the new DAB amp to the original Fakra in the boot that the old amp ran to, I bought a 1m lead off Ebay for this.
I'd had a fault code thrown up without this cable as I assume the ECU saw this was open circuit . Last time I checked the fault codes I had none with regards to the stereo. HTH :happy2:
--- Quote from: mrvertigo73 on October 11, 2014, 12:27:28 am ---This all looks great bigmig and defo the way I wanna go with my K03 '05 AXX GTI! Quick question - did you have any trouble swapping midline for highline? I bought highline clock off EBay, but everyone with VCDS is telling me it's a nightmare to swap? Any clues? I'm looking to swap in a MFSW too (mines DSG)
--- End quote ---
No trouble at all as Kalu did it all for me. :grin: He needed to get around the Immo issue and I left him with the new dash for an hour then showed back up at his house and he swapped in 20 mins, drop him a pm. If you're too far away I'm sure I remember the option of posting the dash to him and him then giving you a quick run through on the install via e-mail or pm's. :happy2:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version