Make a donation

Poll

Exhaust style

duplex
side exit
r32 exit

Author Topic: "GOLFZILLA" .... 600+BHP Project... TSR Performance ....  (Read 246204 times)

Offline Pikey Motorsports

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 34
  • Posts: 1793
Re: Pikey Motorsports ED30 !!
« Reply #30 on: March 03, 2013, 06:27:26 pm »
sorry officer! usually get a £60 fine from experience, never really had much hassle on previous cars allthough this one is abit smaller then usual but ill give it ago
« Last Edit: March 03, 2013, 06:31:15 pm by Pikey Motorsports »
TSR PERFORMANCE GTX30 520BHP
LITCHFIELD R35 GT-R 660BHP
MSL E63 AMG 720BHP
HCP BM3 M5 800BHP

Saintsteve

  • Guest
Re: Pikey Motorsports ED30 !!
« Reply #31 on: March 03, 2013, 06:39:03 pm »
sorry officer! usually get a £60 fine from experience, never really had much hassle on previous cars allthough this one is abit smaller then usual but ill give it ago

From experience?  :signLOL:

Ok , although it looks great but I wouldn't dream of leaving that on without risk of fines etc

Offline Pikey Motorsports

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 34
  • Posts: 1793
Re: Pikey Motorsports ED30 !!
« Reply #32 on: March 03, 2013, 07:05:29 pm »
had a fine or 2 over the years from previous small plates but never points :smiley:

i agree the golf does look good with a smooth grille.. ill risk it for awhile and see what happens it dont get used much so might be okay for awhile lol
« Last Edit: March 03, 2013, 07:10:04 pm by Pikey Motorsports »
TSR PERFORMANCE GTX30 520BHP
LITCHFIELD R35 GT-R 660BHP
MSL E63 AMG 720BHP
HCP BM3 M5 800BHP

Offline taff-turbo

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 3
  • Posts: 88
    • Email
Re: Pikey Motorsports ED30 !!
« Reply #33 on: March 03, 2013, 07:23:41 pm »
i dont think its an endorsable offence but if persistant the dvla can withdraw the registration.....

Offline theo

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 8
  • Posts: 364
Re: Pikey Motorsports ED30 !!
« Reply #34 on: March 04, 2013, 08:31:24 pm »
It's a non endorsable £60, but many traffic plod I know will take a photo of repeat offenders and they go to the DVLA

Offline Pikey Motorsports

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 34
  • Posts: 1793
Re: Pikey Motorsports ED30 !!
« Reply #35 on: March 07, 2013, 02:44:51 pm »
Wrapped the ITG Intake piping

Removed oil cap neck

BSH PCV revamp




made quite a difference for a couple of small mods  :happy2:
TSR PERFORMANCE GTX30 520BHP
LITCHFIELD R35 GT-R 660BHP
MSL E63 AMG 720BHP
HCP BM3 M5 800BHP

Offline craig_t

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 1
  • Posts: 245
  • Craig
    • Email
Re: Pikey Motorsports ED30 !!
« Reply #36 on: March 07, 2013, 08:09:33 pm »
Wrapped the ITG Intake piping

Removed oil cap neck

BSH PCV revamp




made quite a difference for a couple of small mods  :happy2:

I didn't know you could remove the oil cap neck. Looks so much better. Is it easy to do?
Admin notice, sig pic removed for being to big.

Offline craig_GTI

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 90
    • Email
Re: Pikey Motorsports ED30 !!
« Reply #37 on: March 08, 2013, 08:32:23 am »
Very nice edition! Couple of questions if you don't mind? Front plate looks so much better? Where's it from? What have you wrapped the intake piping in? Looks amazing? And +1 for the oil cap neck info.. Sorry for all the questions :) thanks in advance.. Craig.
Tornado red mk5 Golf GTI 5 door.

Offline Pikey Motorsports

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 34
  • Posts: 1793
Re: Pikey Motorsports ED30 !!
« Reply #38 on: March 09, 2013, 04:39:56 pm »
cheers people

the plate was from a company online called zoogle i think..

the intake is wrapped in dei gold heatwrap available from demon-tweeks

and the oil cap neck.. just take your oil cap off put a clean cloth in and i just gave the kneck a tap with a set of heavy mole grips/light tap with a hammer etc

Cheers
TSR PERFORMANCE GTX30 520BHP
LITCHFIELD R35 GT-R 660BHP
MSL E63 AMG 720BHP
HCP BM3 M5 800BHP

Offline Pikey Motorsports

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 34
  • Posts: 1793
Re: Pikey Motorsports ED30 !!
« Reply #39 on: March 09, 2013, 05:01:38 pm »
Little busy today...

Forge twintercooler..



Heres a pic of how bad the drivers side intercooler hose fits  :surprised:



So had to give it a trim  :stupid:



And back on  :happy2:



Lower grill out  :popcornsoda:



Forge Re-circulation vale

 :laugh:

Milltek full turbo back non res, decatted!! :booty:



And relaxxxxxx  :party: :drinking:

« Last Edit: March 09, 2013, 05:07:37 pm by Pikey Motorsports »
TSR PERFORMANCE GTX30 520BHP
LITCHFIELD R35 GT-R 660BHP
MSL E63 AMG 720BHP
HCP BM3 M5 800BHP

Offline camfollower

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 10
  • -Receive: 31
  • Posts: 556
  • Cam follower awareness.
Re: Pikey Motorsports ED30 !!
« Reply #40 on: March 09, 2013, 05:19:20 pm »
Looks great!  That's quite enough work for one Saturday! :party:

Offline Pikey Motorsports

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 34
  • Posts: 1793
Re: Pikey Motorsports ED30 !!
« Reply #41 on: March 09, 2013, 05:24:51 pm »
Cheers and it sure was! twintercooler hose was a pain in the ass
TSR PERFORMANCE GTX30 520BHP
LITCHFIELD R35 GT-R 660BHP
MSL E63 AMG 720BHP
HCP BM3 M5 800BHP

Offline Dave J

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 45
  • -Receive: 63
  • Posts: 880
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,55935.0.html
Re: Pikey Motorsports ED30 !!
« Reply #42 on: March 09, 2013, 05:57:04 pm »
Woah, you have been busy!  :congrats:

Good work - worrying fitment on that hose, but glad to see it trimmed up ok.

Would be grateful if you can put up a vid at some point - really wondering if to put a milltek on my ED30 or not. I think I will, but not sure if full system or just the catback.

I did it in stages on my old mkiv - fitting the DP was quite noticeable in performance, whereas fitting the catback first just gave it a bit of voice (well needed on the 1.8t).

Think yours must sound quite throaty now  :smiley:


Edition 30 - no. 1387

Offline benj1989

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 138
Re: Re: Pikey Motorsports ED30 !!
« Reply #43 on: March 09, 2013, 06:43:01 pm »
Looks great soo far.

Sent from my LG-P920 using Tapatalk 2

Offline craig_GTI

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 90
    • Email
Re: Pikey Motorsports ED30 !!
« Reply #44 on: March 09, 2013, 06:56:46 pm »
cheers people

the plate was from a company online called zoogle i think..

the intake is wrapped in dei gold heatwrap available from demon-tweeks

and the oil cap neck.. just take your oil cap off put a clean cloth in and i just gave the kneck a tap with a set of heavy mole grips/light tap with a hammer etc

Cheers

Thanks for the reply  :happy2:

New updates look amazing!
Tornado red mk5 Golf GTI 5 door.