Make a donation

Author Topic: Cleaning Alloys....  (Read 6103 times)

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Cleaning Alloys....
« on: November 27, 2008, 03:19:54 pm »
....

As most of you already know, I'm not especially into detailing - I spend a couple of hours handwashing my GTI but only when she gets dirty. So that can be once every 4-6 weeks and only if the weather allows outdoor cleaning. I use Meguiar's NXT Generation car wash and a lambswool mitt and big waffle(?)/microfibre cloth thingy.



However, I am more inclined to wash the alloys more often. I am changing the finish on my diamond-cut alloys to powdercoated, in order to keep out the dreaded 'white worm'. It's a common issue and I don't understand why VAG continue with it as it results in a lot of warranty claims.



So, when my alloys are powdercoated, what do you recommend please for cleaning and protecting them?

Thanks +++





On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: Cleaning Alloys....
« Reply #1 on: November 27, 2008, 03:23:48 pm »
If you wash them regular you should only need  just normal mild soap, then poorboys wheel sealent. thats what i reckon.  :smiley:

Offline MAT ED30

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 25
  • -Receive: 82
  • Posts: 5728
  • Vwr fan boy
    • Email
Re: Cleaning Alloys....
« Reply #2 on: November 27, 2008, 03:36:33 pm »
my god your wheels are fooooooked  :sad: but i bet they look awesome now

Mods yes but way too many to stick in this little box

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Cleaning Alloys....
« Reply #3 on: November 27, 2008, 03:38:39 pm »
^^^^



Ah, pink gunk for a pink car!

Cheers, TC :drinking:


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Cleaning Alloys....
« Reply #4 on: November 27, 2008, 03:40:32 pm »
my god your wheels are fooooooked  :sad: but i bet they look awesome now

....Well, right now today, they probably are totally stripped but they should be powdercoated and ready for Saturday's mega-meet.

:happy2:

Meanwhile, my Monza 17's are back on : -


« Last Edit: November 27, 2008, 03:47:19 pm by RedRobin »


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline 08micsta

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 1
  • -Receive: 63
  • Posts: 1011
  • Smart Fortwo 600cc
    • Email
Re: Cleaning Alloys....
« Reply #5 on: November 27, 2008, 03:45:40 pm »
Any sealant should do the trick on the rims Robin.

Clean them with a degreaser or car soap - not kitchen cleaner lol and let them soak a bit. Agitate them with a normal paint brush or if you are feeling posh use a "Meguirs/ Zaino/ Swissvax Wheel cleanser"  :P :laugh: and then rims them down. Use a normal MF to dry them off and take the car around the block not only to remove other water on the car but also from the rims.

Mike
No PAS. No ESP. No DSC. No TCS. No ABS. Just my right foot between me and oblivion. Oh - And a seatbelt.

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Cleaning Alloys....
« Reply #6 on: November 27, 2008, 03:54:50 pm »
....

Thanks, Mike :happy2:

I've got a very container of VIRO-SOL citrus cleaner and degreaser and so spray with that, followed by just gentle water-hose while using Meguair's alloys soft brush and then wipe dry with absorbant paper kitchen roll.


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline 08micsta

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 1
  • -Receive: 63
  • Posts: 1011
  • Smart Fortwo 600cc
    • Email
Re: Cleaning Alloys....
« Reply #7 on: November 27, 2008, 04:00:10 pm »
No no

All good until the kitchen paper towel  :laugh:
rather dry it with a microfibre because the microfiber cloth will absorb whatever remaining dirt and grime possibly stays behind and wont scratch the rims...

Whereas your kitchen towel traps the dirt (As it has zero abosrbing "powers" and drags the sand/dirt/dust particles over the rim surface scratching the rims and dulling the look of your rims and such.

If you used a kitchen cloth on the Monza's then thats probably why you got the whiteworn (assuming of course you didnt curb them etc).

Mike
No PAS. No ESP. No DSC. No TCS. No ABS. Just my right foot between me and oblivion. Oh - And a seatbelt.

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7834
  • ED30 No.1412
    • Email
Re: Cleaning Alloys....
« Reply #8 on: November 27, 2008, 04:14:24 pm »
I normally soak the alloys with water, spray on Megs alloy wheel cleaner, leave for a bit, scrub with an alloy brush, try to remove the stubborn stains in the corners with a mf mitt, rinse, wipe dry, use ag srp, seal with pb wheel sealant.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline 08micsta

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 1
  • -Receive: 63
  • Posts: 1011
  • Smart Fortwo 600cc
    • Email
Re: Cleaning Alloys....
« Reply #9 on: November 27, 2008, 04:25:33 pm »
Thats perfect Stealthwolf  :driver:

Only prob is this part:

Quote
try to remove the stubborn stains in the corners with a mf mitt

I sort of read it as- "try to remove stubborn stains in the corners with a milf"

 :jumping: :signLOL:
No PAS. No ESP. No DSC. No TCS. No ABS. Just my right foot between me and oblivion. Oh - And a seatbelt.

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7834
  • ED30 No.1412
    • Email
Re: Cleaning Alloys....
« Reply #10 on: November 27, 2008, 04:32:44 pm »
I sort of read it as- "try to remove stubborn stains in the corners with a milf"

TBH with you, so did I!

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline 08micsta

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 1
  • -Receive: 63
  • Posts: 1011
  • Smart Fortwo 600cc
    • Email
Re: Cleaning Alloys....
« Reply #11 on: November 27, 2008, 04:34:56 pm »
 :signIWS: :signLOL:
No PAS. No ESP. No DSC. No TCS. No ABS. Just my right foot between me and oblivion. Oh - And a seatbelt.

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Cleaning Alloys....
« Reply #12 on: November 27, 2008, 04:49:41 pm »
^^^^

:signLOL:

You're too young to fancy MILF's!!


 
:love: :evilgrin:


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline 08micsta

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 1
  • -Receive: 63
  • Posts: 1011
  • Smart Fortwo 600cc
    • Email
Re: Cleaning Alloys....
« Reply #13 on: November 27, 2008, 04:54:15 pm »
^^^

The milfs at my school have bigger breasts than that and clearly enjoy the attention that they get  :innocent: :mad: :signLOL:
One day I want to look at your hardrive robin  :rolleye:
No PAS. No ESP. No DSC. No TCS. No ABS. Just my right foot between me and oblivion. Oh - And a seatbelt.

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: Cleaning Alloys....
« Reply #14 on: November 27, 2008, 05:03:22 pm »
Red, I did this the other week and if you wash them regular you really dont need anything other than Lambs wool mitt, and ed brush. Honestly a quick wash once a week, once sealed and the dust and dirt just falls off.  :jumping:

                   http://www.golfgtiforum.co.uk/index.php?topic=94247.0