All Things Mk5 > How to Guides / Troubleshooting

Quad Rear Lights / Skyline Mod using standard inner lens (NOT Valeo)

<< < (8/34) > >>

MateyGuv:
The ones I used had a connector before the resistor. I was able to carefully remove the wires from the connector and put though a 2mm hole i drilled in the lens then re insert the wires in the connector.

v4rley:
Well gave it a bash and pretty chuffed with the outcome! Still need to have a play with the final wiring and perhaps some led bulbs for the outers. Brightness is good match, just the halogen don't photo so well. Thanks for your guide it was great help and encouragement!!  :drinking:

MateyGuv:
Looking good!!!  :congrats: The LED bulbs in the outers are really worth doing. I found the outers looked a little orange when compared to the LED rings I used on the inners.  

G40will:
I'm thinking about doing the led rings in my old lights and tinting them of course. Would I be able to have led rings in the outers and have them light up more under braking?

MateyGuv:
Iv never taken the outers apart so not sure what they look like inside. From what iv seen I think they are two halfs - each outer has two bulbs in them. It may be easier to re wire them so both bulbs light up under braking. It would look cool so I may need to get my thinking hat on

Navigation

[0] Message Index

[#] Next page

[*] Previous page