Forum Donations 2024
on February 25, 2024, 11:16:50 am
HI Guys Its been over a year since our last request for donations. The forum kitty is empty again  I have setup another donation page. The donate banner should also take you to the donation page. Thanks again for your support  https://www.paypal.com/pools/c/94nqyg0CUYYou can also send paypal payments (as gift) to donate(at)mk5golfgti.co.uk as paypal takes a cut on donations to money pools.
Re: Edition 30 - Register
Last Poster: R30EVW in Mk5 General Area on Yesterday at 04:12:40 am
0002 - neilw
0003 - wossy1
0004 - suf
0005 - bones65
0007 - Monte
0009 - chigmuss
0014 - Fezz10
0015 - TomA
0016 - Rickyquicky
0024 - R30 EVW (dshaw)
0025 - Moe
0027 - Flossy-edition30
0030 - Ashley g
0036 - NickG60
0037 - Baza-gt
Re: Coolant hoses
Last Poster: lazy in Mk5 General Area on September 10, 2024, 09:27:29 pm
I got the part number for the bottom hose off my delivery note but I just realised when I scrolled past your picture your engine is manual and mine is a DSG so my hose has got an extra outlet on. So the part number will be no help to you sorry.
Re: Things to look out for MK5 GTI
Last Poster: ZoliWorks in Mk5 General Area on September 10, 2024, 05:55:44 pm
Besides what has been said before, if the car has been sitting for a while, check the rear calipers cause on the mk5 generation they like to get stuck and you'll have to change them.
Re: Window Tinting
Last Poster: Vecridorm in Mk5 General Area on September 09, 2024, 07:34:44 pm
Just picked up this 2 days ago. Misus wants the tint strip gone from the windscreen. Reckon it’ll ruin the overall look? I’m in my late thirty’s now so I kinda agree with her!
Re: Scratchdoctor Leather care
Last Poster: lazy in Mk5 General Area on September 08, 2024, 04:40:31 pm
I thought I'd have a go at using it as I'd already bought it.
I might as well rubbed a £10 note on the seat and then threw it in the bin.
What an absolute waste of time pierce of s#!t product.
Re: Loss of power past 5.5k rpm in 4th gear or above
Last Poster: ZoliWorks in Mk5 General Area on September 08, 2024, 03:26:08 pm
Aight so I'#039ve done another log where I logged lambda and injection timing then spoke with a local tuner. He says my injection timing is too much and my lambda is maxed out at 25% because 1.55 bar boost is too much for my setup. He recommends a remap for 1 bar boost. He showed logs where he made 375hp on 1.35 bar boost. He also said that 340hp and 450nm is the safe limit on my stoc
Re: Genuine cam follower unavailable
Last Poster: lazy in Mk5 General Area on September 08, 2024, 11:30:07 am
I'#039m thinking that my follower must have been replaced already, because that follower surely didn'#039t cause the wear to the cam. I'#039ll probably do about 6000 miles in a year so I'#039ll check it next year and see how bad it
Re: Tdi 4mo
Last Poster: Vecridorm in Members Rides on September 07, 2024, 08:53:12 pm
The specs are the following,
Duel climate, heated cloth seats with armrest, fog lights, heated and folding mirrors, Ronal alloys, 4motion gen 2 haldex.
Bkd 16v engine, just done 150k. Runs brilliant, new Dmf + clutch, scrap yard gearbox on 83k fitted.
Re: Gearbox oil suggestions
Last Poster: Vecridorm in How to Guides / Troubleshooting on September 07, 2024, 07:43:57 pm
The genuine oil is super thin, designed to improve cold shifts, and it is the best stuff for that without question. nbsp However, it'#039s not that cold the UK and with an older box with loads of miles on it, you can get away with aftermarket stuff. Redline gear oils work really well but they'#039re not chea
Re: Mk6 Golf R Swap
Last Poster: pudding in Technical Workshop on September 07, 2024, 11:57:52 am
Well done, thats quite the retrofit  If you can't find a leaked ELSA wiring diagram source, one of those AutoData type online manuals will probably suffice. They're cheap with a 1 month subscription, which should be enough time to do what you need to do.
Re: WHeel bearing type of noise
Last Poster: pudding in Mk5 General Area on September 07, 2024, 10:23:46 am
You can hear bad rear bearings if you use a long screwdriver as a stethoscope on the hub knuckle whilst rotating the wheel. It'#039s a whirring noise.
The front bearings you can'#039t check for wear until you remove the CV joint. nbsp If you can hear disc rubbing noises when turning at slow speeds, that kind of does indicate a bad front bearing as it'#039s wobbling about under the s
Re: Cam chain idle 26.5KW
Last Poster: pudding in Mk5 General Area on September 07, 2024, 10:13:23 am
Yeah that's fine. The important thing is the specified and actual track each other when driving, which they do. Idle doesn't really matter in the grand scheme of things, especially if it's only 1KW off -4KW is OK. Normally see -3KW after a change job that drops to -4KW with hot oil, so it's fine.
|
 Users: 2 Guests: 339
|
