All Things Mk5 > Sat Nav and Car Audio

RNS510 Firmware Upgrade Dealer/Supplier

<< < (6/19) > >>

vRS Carl:
The speed in KMH is nothing to do with the Firmware.

I hav tried (unsuccessfully so far  :ashamed:) to fix this. But as soon as you modify a map disc to use either BMW maps or add speed cameras it changes the Speed Display to KMH.

I currently am using an untouched V6 maps disc (map data Q4 2008) and that works fine.

268X firmware is for all MFD3 and is the firmware that is put on by the factory for cars built week 52 2009 onwards iirc

Carl :happy2:

182_blue:

--- Quote from: Mater on January 02, 2010, 01:14:22 pm ---The speed in KMH is nothing to do with the Firmware.

I hav tried (unsuccessfully so far  :ashamed:) to fix this. But as soon as you modify a map disc to use either BMW maps or add speed cameras it changes the Speed Display to KMH.

I currently am using an untouched V6 maps disc (map data Q4 2008) and that works fine.

268X firmware is for all MFD3 and is the firmware that is put on by the factory for cars built week 52 2009 onwards iirc

Carl :happy2:

--- End quote ---

hmm, the reason i havnt put it on is i have a soundpack and i know of two people loosing all sound after the upgrade  :confused:, plus i dont want to have to reinstall everything and change the settings on the RNS with VCDS, and other users have reported that they still get start in Germany issues and MP3 start issues !

mortygttdi:

--- Quote from: Hedge on January 02, 2010, 11:09:39 am ---
--- Quote from: golfman on January 02, 2010, 08:56:38 am ---Not entirely true as i have an A revision unit with a new s canbus with fw 2660 and voice control on the RNS510!!!
Sometimes when i start the car it's in germany(but it only lasts for 2 seconds) :happy2:

scott.

--- End quote ---

I have an A rev unit on 266x firmware but we failed with voice control.
Can you post up your coding or an autoscan please?

--- End quote ---

Hedge have you done the push to talk on the steering wheel and also navigation has to be set in controller 37



Byte 7 bit 1 as to be un-ticked

Darren

vRS Carl:

--- Quote from: 182_blue on January 02, 2010, 01:29:51 pm ---hmm, the reason i havnt put it on is i have a soundpack and i know of two people loosing all sound after the upgrade  :confused:, plus i dont want to have to reinstall everything and change the settings on the RNS with VCDS, and other users have reported that they still get start in Germany issues and MP3 start issues !

--- End quote ---

Not heard about any sound issues :confused: mine was fine. ( i don't have a soundpack though)

The only settings you will have to change is the test menu and thats only if you don't get a modded firmware. What other settings are you needing to change?

The only reason you have to put maps and music back on is because 268X is a factory firmware not a dealer upgrade.

As i said with the germany issue it happens rarely and when it does it goes in about 2 seconds. I had the same problem with 266X firmware that you did. Now when my car has been parked up ( i even had the battery off the other day to give it a bit of maintenance over night) and when i plugged it back in i started in germany and literally about 2 secs later i was back at my parents house.

The only MP3 issue i have heard is the song always starts from the beginning. I don't see this as a problem but now this only happens if playing from an SD card. If it's done from the HDD it starts where it left off.

HTH

Carl :happy2:

182_blue:
Im guessing the soundpack issue is just coding, but its because when i installed my rns the sound worked even before i coded with VCDS, so not sure how there loosing sound altogether !, i might give it a go, but as the unit is now working fine im not sure i should mess with it again  :grin:


--- Quote from: Mater on January 02, 2010, 01:44:53 pm ---
--- Quote from: 182_blue on January 02, 2010, 01:29:51 pm ---hmm, the reason i havnt put it on is i have a soundpack and i know of two people loosing all sound after the upgrade  :confused:, plus i dont want to have to reinstall everything and change the settings on the RNS with VCDS, and other users have reported that they still get start in Germany issues and MP3 start issues !

--- End quote ---

Not heard about any sound issues :confused: mine was fine. ( i don't have a soundpack though)

The only settings you will have to change is the test menu and thats only if you don't get a modded firmware. What other settings are you needing to change?

The only reason you have to put maps and music back on is because 268X is a factory firmware not a dealer upgrade.

As i said with the germany issue it happens rarely and when it does it goes in about 2 seconds. I had the same problem with 266X firmware that you did. Now when my car has been parked up ( i even had the battery off the other day to give it a bit of maintenance over night) and when i plugged it back in i started in germany and literally about 2 secs later i was back at my parents house.

The only MP3 issue i have heard is the song always starts from the beginning. I don't see this as a problem but now this only happens if playing from an SD card. If it's done from the HDD it starts where it left off.

HTH

Carl :happy2:

--- End quote ---

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version